[chbot] Molten Media Stripper Party - Wednesday 6pm until late!

Spencer Travers spencer.travers at gmail.com
Wed Nov 25 05:34:27 GMT 2020


BYO tools, especially Torx driver bits.

Spencer

On Wed, 25 Nov 2020, 10:37 AM Andy Gardner, <ceo at andygardner.com> wrote:

>
> Sorry about neglecting to include the address. I knew, after getting back
> from sorting and moving stuff from there in the small hours, I would forget
> something in the invitation email.
>
> The Stripper Party is at 8b Wordsworth Street - the old location. We're
> having one tonight, and depending on how much stuff we manage to get
> through, we might need to have another one on Thursday!
>
> There's a lot more room to move there now that most of the "stock" has be
> relocated.
>
> The new location is 11/21 Michelle Road, Wigram, and will be run in a more
> efficient and tidy manner.
>
> There is going to be a special section - in the new much larger and tidier
> shop - for stuff that robotics members (and men's shed members) will be
> interested in.
>
> We will probably be closed for a few days as we're just waiting for Enable
> to get the fibre installed. I'm planning to pull some old cat5 phone lines
> out of some ducting (and replace with a pullstring) to speed up the install
> when the contractor arrives.
>
>
> Cheers,
>
> Andy
>
>
>
>
>
> On 25/11/20 7:55 am, stephen at irons.nz wrote:
> > Address?
> >
> > Date: Today, Wednesday 25 November?
> >
> > Time: 6pm
> >
> >
> > On 25/11/2020 02:25, Andy Gardner <ceo at andygardner.com> wrote:
> >
> >     Hi Team,
> >
> >     Molten Media is moving to a new, better suited, warehouse/office at
> the end of the month.
> >
> >     To do this, we need to urgently strip a large number of old
> computers and are hoping that some of you can come along Wednesday night
> from 6pm to help us with this task.
> >
> >     To speed the process up, it would be appreciated if those who have
> them could bring along their electric screwdrivers/impact drivers, with the
> appropriate bits (Philips #2 for standard PC case screws?).
> >     Lots of other little dismantling jobs to do too, such as
> photocopiers.
> >
> >     Hope to see you all there!
> >
> >     Andy (and Rudy)
> >
> >     _______________________________________________
> >     Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> >     https://lists.ourshack.com/mailman/listinfo/chchrobotics
> >     Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> >     Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> >     When replying, please edit your Subject line to reflect new subjects.
> >
> >
> >
> > _______________________________________________
> > Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> > https://lists.ourshack.com/mailman/listinfo/chchrobotics
> > Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> > Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> > When replying, please edit your Subject line to reflect new subjects.
> >
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20201125/a905ba49/attachment.html>


More information about the Chchrobotics mailing list