[chbot] Parallax Prop Plug

[Richard Jones]

Hi Gary,

I found a schematic for the Sanguino here:
http://sanguino.cc/1-0kitassembly

Your modified prop plug will need a pin out adaptor to work with the
Sanguino as the pin out is a little different, otherwise it looks like it
will be fine.

Richard

On Sat, 04 Jul 2009 09:48:18 +1200, Gary T <grogyan at woosh.co.nz> wrote:
> Hello,
> I'm looking for some help on a small problem, i've got a Propeller 
> Prop Plug from Parallax, modded to enable programming with a 
> BasicX24, but i'm beginning to work with the Arduino boards.
> The board I have doesn't natively support USB and requires a USB to 
> TTL converter, rather than me buying another converter, would anyone 
> know if a modded Prop Plug will work alright with it?
> 
> The board I have is a Sanguino.
> The mod in question involved removing a capacitor and putting in a 
> 150R resistor
> http://www.zbasic.net/forum/attachments/files/dscn4391a_616.jpg
> 
> Parallax Prop plug
>
http://www.parallax.com/Store/Microcontrollers/PropellerTools/tabid/143/ProductID/398/List/0/Default.aspx?SortField=ProductName,ProductName
> 
> Thanks
> 
> 
> Gary T
> 
> 
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> web site: http://kiwibots.org
> When replying, please edit your Subject line to reflect new content.