[chbot] Parallax Prop Plug

[jimmy allen]

You could build a converter.I have a schematic and you would probably
be able to construct it for less than $20.

On 7/4/09, Richard Jones <rjtp at ihug.co.nz> wrote:
> Hi Gary,
>
> I found a schematic for the Sanguino here:
> http://sanguino.cc/1-0kitassembly
>
> Your modified prop plug will need a pin out adaptor to work with the
> Sanguino as the pin out is a little different, otherwise it looks like it
> will be fine.
>
> Richard
>
> On Sat, 04 Jul 2009 09:48:18 +1200, Gary T <grogyan at woosh.co.nz> wrote:
>> Hello,
>> I'm looking for some help on a small problem, i've got a Propeller
>> Prop Plug from Parallax, modded to enable programming with a
>> BasicX24, but i'm beginning to work with the Arduino boards.
>> The board I have doesn't natively support USB and requires a USB to
>> TTL converter, rather than me buying another converter, would anyone
>> know if a modded Prop Plug will work alright with it?
>>
>> The board I have is a Sanguino.
>> The mod in question involved removing a capacitor and putting in a
>> 150R resistor
>> http://www.zbasic.net/forum/attachments/files/dscn4391a_616.jpg
>>
>> Parallax Prop plug
>>
> http://www.parallax.com/Store/Microcontrollers/PropellerTools/tabid/143/ProductID/398/List/0/Default.aspx?SortField=ProductName,ProductName
>>
>> Thanks
>>
>>
>> Gary T
>>
>>
>> _______________________________________________
>> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
>> http://lists.ourshack.com/mailman/listinfo/chchrobotics
>> web site: http://kiwibots.org
>> When replying, please edit your Subject line to reflect new content.
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> web site: http://kiwibots.org
> When replying, please edit your Subject line to reflect new content.
>