[mythtvnz] High quality cables

[Paulgir]

On Mon, 16 Feb 2015 10:32:42 +1300, Don Robertson <don at robertson.net.nz>  
wrote:

> I'm also wondering if I keep using the term 'professional quality' but  
> don't
> know what it means. Every time I do something around here, I see what a  
> crappy
> job the 'professionals' did the first time. For example, years ago I  
> noticed
> the TV aerial was waving around in the slightest wind. I had a look and  
> it was
> held on by a couple of screws going into a sheet of galvanized iron.  
> Another
> thing that is really annoying is the roof goes so far into the guttering  
> that
> you can't clean it out without cutting your hands on the roof. One  
> section of
> guttering is drained by a 25 mm pipe that runs into another down-pipe.
>
> Don't get me started.
>
> Grumpy from Halswell
>
Unfortunately the "Professionals" you write about were likely to be the  
Electricians who wired the house.
They never had much knowledge of the intricacies of RF signals and coax  
cabling.

-Paul