[mythtvnz] HVR2200 dead?

[Curtis Walker]

On 23 August 2015 at 17:45, David Moore <dmoo1790 at ihug.co.nz> wrote:
>
> Hi folks,
>
> Looks like my HVR2200 has died. I get "saa7164_downloadimage() image corrupt" in syslog:
>
> [   15.808152] saa7164 driver loaded
> [   15.839286] saa7164 0000:05:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
> [   15.839444] CORE saa7164[0]: subsystem: 0070:8980, board: Hauppauge WinTV-HVR2200 [card=4,autodetected]
> [   15.839450] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfd400000
> [   15.839455] saa7164 0000:05:00.0: setting latency timer to 64
> [   15.839459] IRQ 16/saa7164[0]: IRQF_DISABLED is not guaranteed on shared IRQs
> [   16.339169] saa7164_downloadfirmware() no first image
> [   16.339223] saa7164_downloadfirmware() Waiting for firmware upload (v4l-saa7164-1.0.3.fw)
> [   16.339230] saa7164 0000:05:00.0: firmware: requesting v4l-saa7164-1.0.3.fw
> [   16.368133] saa7164_downloadfirmware() firmware read 3978608 bytes.
> [   16.368136] saa7164_downloadfirmware() firmware loaded.
> [   16.368144] saa7164_downloadfirmware() SecBootLoader.FileSize = 3978608
> [   16.368149] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
> [   16.368150] saa7164_downloadfirmware() BSLSize = 0x0
> [   16.368151] saa7164_downloadfirmware() Reserved = 0x0
> [   16.368153] saa7164_downloadfirmware() Version = 0x51cc1
> [   20.440022] saa7164_downloadimage() image corrupt
>
> There have been no kernel updates or firmware changes on my system for a while so I think it's a hardware fault on the HVR2200. The card is about 5 years old. I have two questions:
>
> 1) Anything I can try to get the card going?
> 2) Anyone know of an NZ (or other) source for an HVR2200?
>
> David
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/

http://www.priceme.co.nz/search.aspx?q=hvr2200