[mythtvnz] HVR2200 dead?

[David Moore]

Hi folks,

Looks like my HVR2200 has died. I get "saa7164_downloadimage() image 
corrupt" in syslog:

[   15.808152] saa7164 driver loaded
[   15.839286] saa7164 0000:05:00.0: PCI INT A -> Link[AE4A] -> GSI 16 
(level, low) -> IRQ 16
[   15.839444] CORE saa7164[0]: subsystem: 0070:8980, board: Hauppauge 
WinTV-HVR2200 [card=4,autodetected]
[   15.839450] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 16, 
latency: 0, mmio: 0xfd400000
[   15.839455] saa7164 0000:05:00.0: setting latency timer to 64
[   15.839459] IRQ 16/saa7164[0]: IRQF_DISABLED is not guaranteed on 
shared IRQs
[   16.339169] saa7164_downloadfirmware() no first image
[   16.339223] saa7164_downloadfirmware() Waiting for firmware upload 
(v4l-saa7164-1.0.3.fw)
[   16.339230] saa7164 0000:05:00.0: firmware: requesting 
v4l-saa7164-1.0.3.fw
[   16.368133] saa7164_downloadfirmware() firmware read 3978608 bytes.
[   16.368136] saa7164_downloadfirmware() firmware loaded.
[   16.368144] saa7164_downloadfirmware() SecBootLoader.FileSize = 3978608
[   16.368149] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[   16.368150] saa7164_downloadfirmware() BSLSize = 0x0
[   16.368151] saa7164_downloadfirmware() Reserved = 0x0
[   16.368153] saa7164_downloadfirmware() Version = 0x51cc1
[   20.440022] saa7164_downloadimage() image corrupt

There have been no kernel updates or firmware changes on my system for a 
while so I think it's a hardware fault on the HVR2200. The card is about 
5 years old. I have two questions:

1) Anything I can try to get the card going?
2) Anyone know of an NZ (or other) source for an HVR2200?

David