[mythtvnz] hdhomerun doesn't connect on restart when connected directly to the lan port

[Paulgir]

On Sat, 27 Apr 2013 16:29:41 +1200, Stephen Worthington  
<stephen_agent at jsw.gen.nz> wrote:

> On Sat, 27 Apr 2013 14:37:28 +1200, you wrote:
>
>> On Sat, Apr 27, 2013 at 1:39 PM, Paulgir <paulgir at gmail.com> wrote:
>>
>>> Apr 27 13:13:42 myth dhcpd: No subnet declaration for eth0 (no IPv4
>>> addresses).
>>> Apr 27 13:13:42 myth dhcpd: ** Ignoring requests on eth0.  If this is  
>>> not
>>> what
>>> Apr 27 13:13:42 myth dhcpd:    you want, please write a subnet  
>>> declaration
>>> Apr 27 13:13:42 myth dhcpd:    in your dhcpd.conf file for the network
>>> segment
>>> Apr 27 13:13:42 myth dhcpd:    to which interface eth0 is attached. **
>>> Apr 27 13:13:42 myth dhcpd:
>>> Apr 27 13:13:42 myth dhcpd:
>>> Apr 27 13:13:42 myth dhcpd: Not configured to listen on any interfaces!
>>>
>>
>> Clearly you have misconfigured DHCP. It's probably working after 20  
>> seconds
>> because it's defaulting back to link-local addresses.
>>
>> I know nothing about that DHCP server, but I think this looks wrong:
>>
>>> host myth-eth0 {
>>>  hardware ethernet 14:da:e9:dc:51:a1;
>>>  fixed-address 10.99.0.1;
>>>  }
>>>
>>
>> DHCP servers listen on a network interface - it can't function until the
>> interface has an IP address. So obviously you can't use a DHCP server to
>> assign an IP address to the interface that the DHCP server is supposed  
>> to
>> be listening on. But that's what this configuration seems to be trying  
>> to
>> do. You should assign 10.99.0.1 to eth0 in the normal way (whatever  
>> that is
>> for ubuntu) and leave this section out.
>>
>> subnet 10.99.0.0 netmask 255.255.255.0 {
>>>  range 10.99.0.50 10.99.0.250;
>>>  option subnet-mask 255.255.255.0;
>>>  option broadcast-address 10.99.0.255;
>>>  option routers 192.168.2.2;
>>>  }
>>>
>>
>> I can't imagine you need the "option subnet-mask" line in there - you
>> already supplied the netmask.
>> I assume "option routers" is setting the gateway on the client  
>> interface.
>> But the client is not going to be able to connect to 192.168.2.2 - it's  
>> not
>> on the same subnet and there is no router or anything to help. This  
>> should
>> be set to the address of the myth box on that subnet, i.e. 10.99.0.1. If
>> the hdhr needs connectivity to the rest of the network then you'll need  
>> to
>> do some iptables config on the myth box.
>>
>> Cheers,
>> Steve
>
> Steve is right, I have just been testing the config on my laptop.  I
> connected it via WiFi and put its eth0 onto my spare 100 Mb/s ethernet
> switch so it thinks there is an ethernet connection and tried out the
> config. The dhcpd server can not assign the address to the eth0 port
> and then serve addresses to the same port - the eth0 port has to be
> manually configured before the dhcpd server starts.
>
> Disconnect the ethernet cable from the MythTV box.  Edit
> /etc/dhcp/dhcpd.conf.  Delete the entire "host" declaration.  Delete
> the "option subnet-mask" line from the subnet declaration.  Change the
> "option routers" setting to 10.99.0.1.  Save the file.  Then go to the
> Network Manager widget, right mouse button, Edit connections, Wired
> and edit the setup for the eth0 port (by default it will be called
> "Wired connection 1".  Set up the eth0 port with a manual IPV4 IP
> address of 10.99.0.1, netmask 255.255.255.0.  Set the gateway address
> to the address of the WiFi port shown by ifconfig.  Leave the DNS
> servers and Search domain settings empty.  Save the config.  Connect
> the ethernet cable to eth0.
>
> Run the command:
>
>   start isc-dhcp-server
>
> Run ifconfig and it should show 10.99.0.1 for the IPv4 address. And
> "ps -e | grep dhcp" should show that dhcpd is running.  Plug in the
> HDHomerun and see if it works - I think by default dhcpd will log a
> message in syslog about it getting a lease, but I can not test that
> here as I do not have a spare device to connect to that ethernet that
> needs an address via DHCP.
>
>
Ifconfig tells me that 10.99.0.1 is the IPv4 address.
ps -e | grep dhcp gives no output
Syslog says (eth0) ip6 addr conf timed out or failed
Wifi does not work
HDHR does not work

Paul