[mythtvnz] No signal on TeVii s480

[Nick Rout]

On Mon, Jun 4, 2012 at 6:38 PM, Glenn Ramsey <gr at componic.co.nz> wrote:

> However it appears to be getting a signal now... because, in order to check
> that
> the card/cable/dish etc were OK I installed the card in a Windows 7 PC,
> installed the TeVii windows drivers and used ProgDVB to tune and watch a few
> Freeview channels, and that worked fine. Now I have put the card back into
> the
> Mythbuntu box and dvbtune shows that there is a signal now! What
> is up with that? I'm guessing that the Windows drivers enabled something on
> the
> card that the linux drivers don't. I will ask on the linux-media list about
> that. In any case it looks like I can continue with my mythtv setup now.
>

More likely a cold boot loaded your card's firmware properly.