[mythtvnz] New install probs - old skystar2

[Nick Rout]

On Fri, Jul 6, 2012 at 5:18 PM, Criggie <criggie at criggie.org.nz> wrote:
> Hi all - I'm trying to help a coworker to get into myth, and its not going
> well.
>
>
> The box is a core2duo with 2 GB ram, running 64 bit Fedora 17 fully updated.
> Kernel is   3.4.4-3.fc17.x86_64
>
> There's one DVB-S card, a plain old Skystar2 on the PCI bus.
>
> 04:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB
> chip / Technisat SkyStar2 DVB card (rev 02)
>
> [    7.265963] sky2: driver version 1.30
> [    7.266147] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
> [    7.266240] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
> [    7.266629] sky2 0000:03:00.0: eth1: addr 00:19:21:1a:a4:5a
> [    7.355596] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver
> chip loaded successfully
> [    7.370171] DVB: registering new adapter (FlexCop Digital TV device)
> [    7.372154] b2c2-flexcop: MAC address = 00:d0:d7:11:04:4b
> [    7.372767] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
> [    7.372770] CX24123: wrong demod revision: 87
> [    7.940240] b2c2-flexcop: found 'ST STV0299 DVB-S' .
> [    7.940245] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
> [    7.940396] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev
> 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
> [   15.587892] sky2 0000:03:00.0: eth0: enabling interface
>
>
> Now the /dev directory is missing some devices compared to my own skystar2
>
> [root at bruce ~]# ll /dev/dvb/adapter0/*
> crw-rw----+ 1 root video 212, 0 Jun 20 17:17 /dev/dvb/adapter0/demux0
> crw-rw----+ 1 root video 212, 1 Jun 20 17:17 /dev/dvb/adapter0/dvr0
> crw-rw----+ 1 root video 212, 3 Jun 20 17:17 /dev/dvb/adapter0/frontend0
> crw-rw----+ 1 root video 212, 2 Jun 20 17:17 /dev/dvb/adapter0/net0
>
> bt:~# ll /dev/dvb/adapter0/*
> crw-rw---- 1 root video 212, 1 Apr 17 11:25 /dev/dvb/adapter0/audio0
> crw-rw---- 1 root video 212, 6 Apr 17 11:25 /dev/dvb/adapter0/ca0
> crw-rw---- 1 root video 212, 4 Apr 17 11:25 /dev/dvb/adapter0/demux0
> crw-rw---- 1 root video 212, 5 Apr 17 11:25 /dev/dvb/adapter0/dvr0
> crw-rw---- 1 root video 212, 3 Apr 17 11:25 /dev/dvb/adapter0/frontend0
> crw-rw---- 1 root video 212, 7 Apr 17 11:25 /dev/dvb/adapter0/net0
> crw-rw---- 1 root video 212, 8 Apr 17 11:25 /dev/dvb/adapter0/osd0
> crw-rw---- 1 root video 212, 0 Apr 17 11:25 /dev/dvb/adapter0/video0
>

Mine is the same as Bruce's I think:

nick at media:~$ ll /dev/dvb/adapter0/*
crw-rw----+ 1 root video 212, 0 2012-07-02 20:57 /dev/dvb/adapter0/demux0
crw-rw----+ 1 root video 212, 1 2012-07-02 20:57 /dev/dvb/adapter0/dvr0
crw-rw----+ 1 root video 212, 3 2012-07-02 20:57 /dev/dvb/adapter0/frontend0
crw-rw----+ 1 root video 212, 2 2012-07-02 20:57 /dev/dvb/adapter0/net0

That's on mythbuntu 10.04 updated within 2-4 week as ago and kernel

nick at media:~$ uname -r
2.6.32-41-generic

Card is (from lspci)

01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII
DVB chip / Technisat SkyStar2 DVB card (rev 02)

I have never seen the additional device nodes that are on your machine
on any dvb device that I can recall.

Here is the dmesg stuff from mine:

[   31.640725] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV
receiver chip loaded successfully
[   31.695834] flexcop-pci: will use the HW PID filter.
[   31.695840] flexcop-pci: card revision 2
[   31.696198] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   31.696204] b2c2_flexcop_pci 0000:01:06.0: PCI INT A -> Link[APC1]
-> GSI 16 (level, low) -> IRQ 16
[   31.712277] DVB: registering new adapter (FlexCop Digital TV device)
[   31.713911] b2c2-flexcop: MAC address = 00:d0:d7:0f:7e:22
[   31.714600] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[   31.714890] CX24123: wrong demod revision: 87
[   31.922955]   alloc irq_desc for 25 on node -1
[   31.922959]   alloc kstat_irqs on node -1
[   31.922969] forcedeth 0000:00:07.0: irq 25 for MSI/MSI-X
[   32.219626] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[   32.219631] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[   32.219708] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S
rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete


What version of mythtv is not recognising the card properly?