[mythtvnz] Hauppauge WinTV PVR-150 [ivtv] not supported in 0.25

[tim Lockyer]

Nick is correct, the IVTV MPEG-2 encoder card has been re-named to the
generic MPEG-2 encoder card. The input selection (That I could not find on
Page 2 Capture Card Setup and was so worried about) in now done simple
through page 5 Input connections. Thanks


On Sat, Aug 25, 2012 at 12:34 PM, Nick Rout <nick.rout at gmail.com> wrote:

> On Sat, Aug 25, 2012 at 10:12 AM, tim Lockyer <drtimlockyer at gmail.com>
> wrote:
> > Nick
> >
> >
> > Thank you for your response. You say the WinTV PVR-150 is supported. The
> > closest entry in the 0.25 Back-End is for a MPEG-2 encoder card there is
> no
> > listing for a IVTV MPEG-2 encoder card as in 0.23. With the old IVTV
> MPEG-2
> > I told the programme how the SKY box was connected “Default input:
> Composite
> > 1”
> >
> > The 0.25 MPEG-2 encoder card does not have any way of telling how the SKY
> > box is connected. Without saying how the SKY is connected I can not see
> how
> > it can work. I have looked at all the other alternatives and still can
> not
> > find any one that has any way of connecting the SKY box.
> >
> > What am I missing?
>
> What you initially missed was that the ivtv encoder has been renamed
> mpeg2 encoder, because ivtv is not the only driver for hardware
> accelerated mpeg 2 cards.
>
> Are you looking for the input on the right page? "Connect Source to
> Input" should have a list of inputs at the top of the page.
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/mythtvnz/attachments/20120825/59343c67/attachment.html>