[mythtvnz] hvr-1100 Start up

[Nick Rout]

On Mon, Oct 3, 2011 at 1:42 PM, Mallett <mallett at actrix.co.nz> wrote:
>
> The firmware upload failed after booting from power off.
>
>
>
>  24.336445] DVB: registering new adapter (saa7133[0])
> [   24.336453] DVB: registering adapter 0 frontend 0 (Philips TDA10046H
> DVB-T)...
> [   24.592026] tda1004x: setting up plls for 48MHz sampling clock
> [   26.888046] tda1004x: timeout waiting for DSP ready
> [   27.016054] tda1004x: found firmware revision 0 -- invalid
> [   27.016058] tda1004x: trying to boot from eeprom
> [   29.344038] tda1004x: timeout waiting for DSP ready
> [   29.392022] tda1004x: found firmware revision 0 -- invalid
> [   29.392026] tda1004x: waiting for firmware upload...
> [   29.634397] tda1004x: no firmware upload (timeout or file not found?)
> [   29.634402] tda1004x: firmware upload failed
> [   30.808026] tda1004x: setting up plls for 48MHz sampling clock
> [   33.064082] tda1004x: timeout waiting for DSP ready
> [   33.104028] tda1004x: found firmware revision 0 -- invalid
> [   33.104033] tda1004x: trying to boot from eeprom
> [   35.440048] tda1004x: timeout waiting for DSP ready
> [   35.488039] tda1004x: found firmware revision 0 -- invalid
> [   35.488044] tda1004x: waiting for firmware upload...
> [   35.495504] tda1004x: no firmware upload (timeout or file not found?)
> [   35.495509] tda1004x: firmware upload failed
> john at john-MS-7191:~$
>

1. please do not top post.

2. you need to find and install the correct firmware file to somewhere
in /lib/firmware