[mythtvnz] hvr-1100 Start up

[Mallett]

The firmware upload failed after booting from power off.



 24.336445] DVB: registering new adapter (saa7133[0])
[   24.336453] DVB: registering adapter 0 frontend 0 (Philips TDA10046H
DVB-T)...
[   24.592026] tda1004x: setting up plls for 48MHz sampling clock
[   26.888046] tda1004x: timeout waiting for DSP ready
[   27.016054] tda1004x: found firmware revision 0 -- invalid
[   27.016058] tda1004x: trying to boot from eeprom
[   29.344038] tda1004x: timeout waiting for DSP ready
[   29.392022] tda1004x: found firmware revision 0 -- invalid
[   29.392026] tda1004x: waiting for firmware upload...
[   29.634397] tda1004x: no firmware upload (timeout or file not found?)
[   29.634402] tda1004x: firmware upload failed
[   30.808026] tda1004x: setting up plls for 48MHz sampling clock
[   33.064082] tda1004x: timeout waiting for DSP ready
[   33.104028] tda1004x: found firmware revision 0 -- invalid
[   33.104033] tda1004x: trying to boot from eeprom
[   35.440048] tda1004x: timeout waiting for DSP ready
[   35.488039] tda1004x: found firmware revision 0 -- invalid
[   35.488044] tda1004x: waiting for firmware upload...
[   35.495504] tda1004x: no firmware upload (timeout or file not found?)
[   35.495509] tda1004x: firmware upload failed
john at john-MS-7191:~$


On 10/03/2011 12:49 PM, Nick Rout wrote:
> On Mon, Oct 3, 2011 at 12:29 PM, Mallett <mallett at actrix.co.nz> wrote:
>> I have a WinTV  HVR-1100 card.
>>
>> When I go into mythbunta after the computer has been turned of I can not
>> play tv. In order to get it started I need to go into windows and start
>> it there. Then go into mythbunta and it will work
>>
>> I was thinking along the lines of sleep mode. Or perhaps a bios setting.
>> Has any one had this problem and Are there any thoughts on why this is.
>> And how to fix it
> 
> Does windows load the firmware into the card and then when you warm
> boot mythbuntu the firmware is in the card? But when you turn the
> system off the firmware disappears due to lack of power?
> 
> Take a look at dmesg from a cold start into linux and see if there are
> any firmware error messages.
> 
> By the way it is mythbuntU not mythbuntA
> 
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/