[mythtvnz] Win-TV Nova-S card not working
Vance McIndoe
vance at juniper.net
Mon Dec 28 09:09:06 GMT 2009
I have no idea what IRQ20 would be used for, or how to change it if I
had to - but maybe I don't have to? From /proc/interrupts it looks like
only conexant is using IRQ 20. I have only one receiver card installed
btw, so it must be that one.
vance at mythbuntu:~$ cat /proc/interrupts
CPU0 CPU1
0: 25 2 IO-APIC-edge timer
1: 0 8 IO-APIC-edge i8042
4: 0 2 IO-APIC-edge
7: 1 0 IO-APIC-edge parport0
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
14: 0 0 IO-APIC-edge pata_atiixp
15: 0 0 IO-APIC-edge pata_atiixp
16: 1 373 IO-APIC-fasteoi ohci_hcd:usb3,
ohci_hcd:usb4, HDA Intel
17: 0 2 IO-APIC-fasteoi ehci_hcd:usb1
18: 0 1023 IO-APIC-fasteoi ohci_hcd:usb5,
ohci_hcd:usb6, ohci_hcd:usb7, nvidia
19: 0 0 IO-APIC-fasteoi ehci_hcd:usb2
20: 5 51238 IO-APIC-fasteoi cx88[0], cx88[0], cx88[0]
22: 0 3 IO-APIC-fasteoi ohci1394
24: 26954 0 HPET_MSI-edge hpet2
27: 16 13858 PCI-MSI-edge ahci
28: 1 1017 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 23 49683 Local timer interrupts
SPU: 0 0 Spurious interrupts
CNT: 0 0 Performance counter interrupts
PND: 0 0 Performance pending work
RES: 8911 3448 Rescheduling interrupts
CAL: 94 114 Function call interrupts
TLB: 466 488 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 2 2 Machine check polls
ERR: 1
MIS: 0
More information about the mythtvnz
mailing list