[mythtvnz] DVB-S initial setup problems

[Steve Hodge]

On Mon, Aug 31, 2009 at 10:12 AM, criggie <criggie at criggie.dyndns.org>wrote:

> However mythtv-setup will not allow me to scan for channels under
> 4)Input Connections.
>
> Scanning for channels only allows the choice of
> 27,500,000
> 28,000,000
> 28,500,000
> 29,900,000
>  3,333,000
> 22,000,000 as symbol rate, and everything says that
> freeview is 22,500,000
>

You can edit the options in that list. Just pick 22000000 and then hit
delete a few times and make it 22500000.

Make sure you've got your LNB set up correctly in the card. It looks like
it's expecting MHz values (ie.10750) but ISTR it used to need kHz values
(10750000) so it might worth trying both. What's in your diseqc_tree table?
Mine has the kHz value.

Any suggestions?  Could someone please show a dump of their
> dtv_multiplex table?
>

The relevant bits are:
frequency: 12456000, inversion: a, symbolrate: 22500000 fec: 3/4 polarity: h

frequency: 12483000, inversion: a, symbolrate: 22500000 fec: 3/4 polarity: h


Cheers,
Steve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20090830/2983001b/attachment.htm