[mythtvnz] Lirc remote for Pace DSR2000 sky decoder

[Simon Eatough]

On Tue, 29 May 2007 15:57:36 Nick Rout wrote:
> Good work, I hope you do as the file suggests and send it to upstream. If
> you do I would add in a few comments about the Remote model and that it is
> used by Sky in NZ etc, as those files are often rather sparse on
> documentation. LIRC will only be improved by sending in new remote files!

Yes I will :-)

Simon


>
> On Tue, May 29, 2007 3:42 pm, Simon Eatough wrote:
> > Hi Guys
> > I've got a DSR2000 and a RC18 remote setup with mythtv.
> >  I used irrecord to generate a irblasterd.conf & comparing that with a
> > RC30
> > config they are different. Here is my RC-18 irblasterd.conf
> >
> > # Please make this file available to others
> > # by sending it to <lirc@bartelmus.de>
> > #
> > # this config file was automatically generated
> > # using lirc-0.8.1-CVS-pvr150(default) on Mon Sep 11 22:09:54 2006
> > #
> > # contributed by
> > #
> > # brand:                       rc18
> > # model no. of remote control:
> > # devices being controlled by this remote:
> > #
> >
> > begin remote
> >
> >   name  rc18
> >   bits           16
> >   flags SPACE_ENC|CONST_LENGTH
> >   eps            30
> >   aeps          100
> >
> >   header       8783  4426
> >   one           604  1618
> >   zero          604   501
> >   ptrail        604
> >   repeat       8786  2173
> >   pre_data_bits   16
> >   pre_data       0x213C
> >   gap          105579
> >   toggle_bit      0
> >
> >
> >       begin codes
> >           1                        0x0CF3
> >           2                        0x946B
> >           3                        0x9C63
> >           4                        0x14EB
> >           5                        0x04FB
> >           6                        0x1CE3
> >           7                        0x4CB3
> >           8                        0x54AB
> >           9                        0x44BB
> >           0                        0xCC33
> >           red                      0x7C83
> >           green                    0xB44B
> >           blue                     0xFC03
> >           yellow                   0xFC03
> >           ch+                      0xAC53
> >           ch-                      0xEC13
> >           vol+                     0x649B
> >           vol-                     0xE41B
> >           mute                     0xA45B
> >           guide                    0x748B
> >           mosiac                   0x6C93
> >           scrollup                 0xD42B
> >           scrolldown               0x24DB
> >           scrollleft               0x2CD3
> >           scrollright              0xDC23
> >           plus                     0x3CC3
> >           ?                        0x34CB
> >           power                    0x847B
> >       end codes
> >
> > end remote
> >
> > Cheers
> > Simon
> >
> >
> > _______________________________________________
> > mythtvnz mailing list
> > mythtvnz@lists.linuxnut.co.nz
> > http://lists.ourshack.com/mailman/listinfo/mythtvnz
> > Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/