[mythtvnz] Lirc remote for Pace DSR2000 sky decoder

[Simon Eatough]

Hi Guys
I've got a DSR2000 and a RC18 remote setup with mythtv.
 I used irrecord to generate a irblasterd.conf & comparing that with a RC30 
config they are different. Here is my RC-18 irblasterd.conf 

# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.1-CVS-pvr150(default) on Mon Sep 11 22:09:54 2006
#
# contributed by
#
# brand:                       rc18
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name  rc18
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       8783  4426
  one           604  1618
  zero          604   501
  ptrail        604
  repeat       8786  2173
  pre_data_bits   16
  pre_data       0x213C
  gap          105579
  toggle_bit      0


      begin codes
          1                        0x0CF3
          2                        0x946B
          3                        0x9C63
          4                        0x14EB
          5                        0x04FB
          6                        0x1CE3
          7                        0x4CB3
          8                        0x54AB
          9                        0x44BB
          0                        0xCC33
          red                      0x7C83
          green                    0xB44B
          blue                     0xFC03
          yellow                   0xFC03
          ch+                      0xAC53
          ch-                      0xEC13
          vol+                     0x649B
          vol-                     0xE41B
          mute                     0xA45B
          guide                    0x748B
          mosiac                   0x6C93
          scrollup                 0xD42B
          scrolldown               0x24DB
          scrollleft               0x2CD3
          scrollright              0xDC23
          plus                     0x3CC3
          ?                        0x34CB
          power                    0x847B
      end codes

end remote

Cheers
Simon