[mythtvnz] Freeview dish set-up woes

[Matt Poff]

I swapped the inputs/outputs around on the meter (running out of ideas) 
and the unit was still powered but didn't squark. However, the channel 
finder read out in MythTV still showed comparable results to before 
(signal and signal/noise ratio both around 45%). After a few seconds 
MythTV crashes.


>
> Richard wrote:
>> Have you got one of the inline simple meters? If so, they are powered 
>> by the
>> sat receiver so there cant be a short on the cable, if it's a proper 
>> battery
>> powered sat meter, then it may just be on the lowest range so squeeling
>> because of all the noise that the lnb puts out.