[mythtvnz] Freeview dish set-up woes
Matt Poff
mythtvnz@lists.linuxnut.co.nz
Sun, 20 May 2007 16:14:47 +1200
That's a good point. It is inline and has a light in it which glows when
squarking so I guess the current is OK. Adjusting the dB knob on the
front has no effect. Adjusting the recessed screw-knob on the back (with
arrows marked 'S' and 'L' also has no effect. The unit is rated for
950-2250MHz and DC 13-18V.
Richard wrote:
> Have you got one of the inline simple meters? If so, they are powered by the
> sat receiver so there cant be a short on the cable, if it's a proper battery
> powered sat meter, then it may just be on the lowest range so squeeling
> because of all the noise that the lnb puts out.
>