[mythtvnz] Kernel 2.6.22 + IVTV problems

[Criggie]

well - there weren't any.

I upgraded to kernel 2.6.22, which is the first to have ivtv included...
and it all went perfectly.

The hardest thing was pulling all the relevant lines out of dmesg, now
that the kernel has parallel initialisation of modules, all the kernel
output is somewhat mixed together.


Linux mythbox 2.6.22 #1 SMP Mon Jul 9 20:30:14 NZST 2007 i686 GNU/Linux


ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 1.0.0 (2.6.22 SMP mod_unload CORE2 ) loading
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 21 (level, low) -> IRQ 20
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 19 (level, low) -> IRQ 18
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 0-0050: Hauppauge model 26559, rev B260, serial# 8741972
tveeprom 0-0050: tuner model is LG S001D MK3 (idx 60, type 38)
tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
(eeprom 0x74)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ======================  NEXT CARD  ======================


-- 
Criggie

http://criggie.dyndns.org/