[chbot] STL file vs 3D printer frustration..

Peter Ellens ellensp at gmail.com
Wed Sep 6 12:09:49 BST 2017


Can someone using a difference slicer (or maybe the xyzprinting one?)
> have a go at opening this stl file and see if you can see what the issue
> is?  (74k stl.. Just a widdle one)
>
> https://www.dropbox.com/s/u4oib2qpcsjkzkq/boxbig.stl?dl=0
I threw it into simply3d 4

It tells me there are non manifold edges, top left corner, down the left 
hand side, entire length

I cant visually see any issues, so im guessing it microscopic

I simplified the stl and removed anything from the mesh that was to 
small to print.. It now seems happy with the stl

Give this a try.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: boxbig_fixed.stl
Type: application/x-extension-stl
Size: 14084 bytes
Desc: not available
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20170906/a1607641/attachment.bin>


More information about the Chchrobotics mailing list