[chbot] DIY SMD reflow soldering

[Kay edgecumbe]

i use a paint stripper gun to do my spldering particularly sweated brass joints where it is brilliant.
dont know how it would go with PCs but will try it some time

> Date: Fri, 22 Jul 2011 19:23:02 +1200
> From: list0570 at paradise.net.nz
> To: chchrobotics at lists.linuxnut.co.nz
> Subject: Re: [chbot] DIY SMD reflow soldering
> 
> On Fri 22 Jul 2011 14:01:48 NZST +1200, Charles Manning wrote:
> 
> > ... or...
> > 
> > Buy a gas soldering kit from Dick Smith for $70.
> > http://dicksmith.co.nz/product/T1105/pro-iroda-pro-70k-solderpro-kit
> > 
> > The hot Blower tip does a great job of SMD soldering and rework.
> 
> Yes, good for touch-ups, but it looks like the fry-pan method is faster
> for a larger number of components and has a lower risk of blowing the
> grit (so to speak) off their places.
> 
> Volker
> 
> -- 
> Volker Kuhlmann
> http://volker.dnsalias.net/	Please do not CC list postings to me.
> 
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meeting Time and Location uncertain while Science Alive is out of action.
> 
> When replying, please edit your Subject line to reflect new content.
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/chchrobotics/attachments/20110723/14188151/attachment.htm