[chbot] Making a PCB

[Mark Atherton]

Tim at Huntsbury Circuits may be able to help, but he is quite expensive.

-Mark

At 09:53 a.m. 5/04/2010, you wrote:
>Sorry if this has been covered before but Google didn't turn up
>anything interesting.
>
>I'd like to make a few small PCBs.  What's a good, affordable, way of
>making a PCB with a reasonable (~1 week) turn around?  Turn around is
>more important than price.  The boards would be two layer at most with
>TQFP (0.8 mm pitch) packages at worst.
>
>The toner transfer method works OK but there's always one part of the
>board that lifts off.  Photoresist boards are too expensive.  Both
>ideally need a good etch tank.  There's a ton of manufacturers out
>there but I've got no idea how to choose between them :)
>
>-- Michael