[mythtvnz] hvr-1100 Start up

[Mallett]

On 10/03/2011 04:28 PM, Nick Rout wrote:
> On Mon, Oct 3, 2011 at 1:42 PM, Mallett <mallett at actrix.co.nz> wrote:
>>
>> The firmware upload failed after booting from power off.
>>
>>
>>
>>  24.336445] DVB: registering new adapter (saa7133[0])
>> [   24.336453] DVB: registering adapter 0 frontend 0 (Philips TDA10046H
>> DVB-T)...
>> [   24.592026] tda1004x: setting up plls for 48MHz sampling clock
>> [   26.888046] tda1004x: timeout waiting for DSP ready
>> [   27.016054] tda1004x: found firmware revision 0 -- invalid
>> [   27.016058] tda1004x: trying to boot from eeprom
>> [   29.344038] tda1004x: timeout waiting for DSP ready
>> [   29.392022] tda1004x: found firmware revision 0 -- invalid
>> [   29.392026] tda1004x: waiting for firmware upload...
>> [   29.634397] tda1004x: no firmware upload (timeout or file not found?)
>> [   29.634402] tda1004x: firmware upload failed
>> [   30.808026] tda1004x: setting up plls for 48MHz sampling clock
>> [   33.064082] tda1004x: timeout waiting for DSP ready
>> [   33.104028] tda1004x: found firmware revision 0 -- invalid
>> [   33.104033] tda1004x: trying to boot from eeprom
>> [   35.440048] tda1004x: timeout waiting for DSP ready
>> [   35.488039] tda1004x: found firmware revision 0 -- invalid
>> [   35.488044] tda1004x: waiting for firmware upload...
>> [   35.495504] tda1004x: no firmware upload (timeout or file not found?)
>> [   35.495509] tda1004x: firmware upload failed
>> john at john-MS-7191:~$
>>
> 
> 1. please do not top post.
> 
> 2. you need to find and install the correct firmware file to somewhere
> in /lib/firmware
> 
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


I found instructions for For the HVR 1600
You copy these drivers to the firmware dir
Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw

I copied the drivers across to the correct place. But am still getting
the same problem.
Any thoughts