[mythtvnz] Optus D1 and Australian TV

[Steven Ellis]

On 11/06/2010, at 7:25 PM, Jim Tittsler wrote:

> On 11/06/2010 18:27, Steven Ellis wrote:
>> I take it you have nothing else using your dish? If this is the case
>> then you just need to make sure you have the correct frequency and
>> polarity defined for the channels.
> 
> Yes, thanks to you and Ross I've got it sorted.  I had completely missed
> that I could scan for both horizontal and vertical polarisations on a
> single video source.
> 
> On 30/07/2009 23:24, Steven Ellis wrote about "SBS on Optus D1":
>> I advise creating an additional video source and assigning it to a
>> fake diseqc entry for your DVB-S card so you can play with the various
>> EPG sources.
> 
> Is this necessary to get the broadcast EPG from both Freeview and SBS?


You can choose to use EIT for the SBS channels, or in my case I have a custom EPG grabber with the correct timezone offset.

Steve


Steven Ellis - Technical Director
OpenMedia Limited
email   - steven at openmedia.co.nz
website - http://www.openmedia.co.nz

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/mythtvnz/attachments/20100611/b5315c04/attachment-0001.htm