[mythtvnz] MythTV upgrade, bleeding code, ready for tester

[Aaron Drysdale]

I will try this, but I haven't changed these settings in a long time,
and this is more than a small difference in volume. No one else has
noticed this? Or no one else here has used this version yet?

And it's not possible to select the default track to play in a
multi-track channel?

Aaron

-----Original Message-----
From: mythtvnz-bounces at lists.linuxnut.co.nz
[mailto:mythtvnz-bounces at lists.linuxnut.co.nz] On Behalf Of Jean-Yves
Avenard
Sent: Wednesday, 1 July 2009 12:26
To: MythTV in NZ
Subject: Re: [mythtvnz] MythTV upgrade, bleeding code, ready for tester

Hi

2009/7/1 Aaron Drysdale <Aaron.Drysdale at provencocadmus.com>:
> Tried this last night, worked perfectly on both live tv and recorded
tv.
> Audio on TV3 using AC3 is very quiet, audio on TV3 using AAC 2ch is
> normal.
>
> So I would suggest that something between this build and the previous
> from Jean-Yves repository has changed wrt audio.

You can try playing with the AC3 upmixer.

First, make sure it is disabled in Setup -> General -> Audio

I found that the volume is affected depending on the upmix quality
used (passive vs the other etc..)

there has been no difference in a long time on the audio code, but you
may have enabled the AC3 upmixer and I'ven noticed slightly lower
volume with it.

Then if it doesn't make a difference, try enable it

And finally, if none of the above works, raise the volume !

_______________________________________________
mythtvnz mailing list
mythtvnz at lists.linuxnut.co.nz
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/