[mythtvnz] Lirc remote for Pace DSR2000 sky decoder

[David Shepherd]

Simon Eatough wrote:
> Hi Guys
> I've got a DSR2000 and a RC18 remote setup with mythtv.
>  I used irrecord to generate a irblasterd.conf & comparing that with a RC30 
> config they are different. Here is my RC-18 irblasterd.conf 
>
> # Please make this file available to others
> # by sending it to <lirc@bartelmus.de>
> #
> # this config file was automatically generated
> # using lirc-0.8.1-CVS-pvr150(default) on Mon Sep 11 22:09:54 2006
> #
> # contributed by
> #
> # brand:                       rc18
> # model no. of remote control:
> # devices being controlled by this remote:
> #
>
> begin remote
>
>   name  rc18
>   bits           16
>   flags SPACE_ENC|CONST_LENGTH
>   eps            30
>   aeps          100
>
>   header       8783  4426
>   one           604  1618
>   zero          604   501
>   ptrail        604
>   repeat       8786  2173
>   pre_data_bits   16
>   pre_data       0x213C
>   gap          105579
>   toggle_bit      0
>
>
>       begin codes
>           1                        0x0CF3
>           2                        0x946B
>           3                        0x9C63
>           4                        0x14EB
>           5                        0x04FB
>           6                        0x1CE3
>           7                        0x4CB3
>           8                        0x54AB
>           9                        0x44BB
>           0                        0xCC33
>           red                      0x7C83
>           green                    0xB44B
>           blue                     0xFC03
>           yellow                   0xFC03
>           ch+                      0xAC53
>           ch-                      0xEC13
>           vol+                     0x649B
>           vol-                     0xE41B
>           mute                     0xA45B
>           guide                    0x748B
>           mosiac                   0x6C93
>           scrollup                 0xD42B
>           scrolldown               0x24DB
>           scrollleft               0x2CD3
>           scrollright              0xDC23
>           plus                     0x3CC3
>           ?                        0x34CB
>           power                    0x847B
>       end codes
>
> end remote
>
> Cheers
> Simon
>
>   
Thanks Simon, I'll give it a whirl tonight.
Dave