[OneRNG-Discuss] Ask about the process to flash Firmware

[Paul Campbell]

The connector is the 6 pin one without the clips, those connectors are
stupidly expensive, if I was just making one or 2 I might just solder wires
to the pins under the board.

I'm travelling in the US right now, I'm happy to make you images when I get
home (around the 18th)

- Paul

On Sat, 30 Nov 2024, 12:43 , <reg-1 at email-1.level2.102604.icu> wrote:

> I am very glade to know there will be new boards early next year! But I
> am still considering make some for myself (My 1st time doing an
> opensource hardware project! Even it's ordered from the pcb factory).
>
> As the result, I still want to conform which 6 pin connector should I
> use, TC2030-IDC-NL or TC2030-IDC-NL-10? (or something else)
>
> Lastly, for the programmer Firmware, is there already build Benito7g.hex
> in the Github repo somewhere? I just have no confidence to make from the
> source code by myself.
>
> Best wishes.
>
>
>
>
> On 2024-11-30 17:06, Paul Campbell wrote:
> > I will have new boards early next year. The 3.0 design is identical to
> > the 2.0 one both in software and board layout, the only differences
> > were for manufacturing. Mostly there's a rough patch under the USB
> > connector to hide the breakaway and the corners are milled very
> > slightly round for aesthetic reasons.
> >
> > The 4.0 version will have a slightly different RNG circuit (again
> > mostly for manufacturability), it's currently undergoing long term
> > reliability testing, it should perform slightly better than the
> > current one, I'm happy to share it once I'm convinced it's a keeper
> >
> > - Paul
> >
> > On Sat, 30 Nov 2024, 03:18 , <reg-1 at email-1.level2.102604.icu> wrote:
> >
> >> Dear OneRNG:
> >> I really love the random number generator, but since currently the
> >> v3
> >> version is Sold Out, I have to consider make my own pcbs. Which
> >> makes me
> >> need ask for the following questions:
> >>
> >> Currently the external is V3.0 design on the website, but the Github
> >>
> >> repo only have v2.0 design. If I can find v3.0 design anywhere?
> >>
> >> Also, since I am build it myself, I need manually flash the
> >> firmwares. I
> >> do have see the programmer pcb design. But I would like to ask could
> >> I
> >> use some other on-self programmer to do the job (like I already have
> >>
> >> j-link edu)? So I don;t need to build the programmer myself.
> >>
> >> 3rd: If I must build the programmer, do I need manually flash the
> >> Firmware for the programmer too? I have seen the programmer Firmware
> >>
> >> source code, but I am wondering is there any already build
> >> Benito7g.hex
> >> Firmware file I can just download and use (so I don't need to
> >> compile by
> >> myself, to be honest, I am not really sure how to do it.)
> >>
> >> And last but not least, for the 6-pin connection wire, which tag
> >> wire
> >> should I use? (I think it's TC2030-IDC-NL, but really not sure...)
> >>
> >> Best
> >>
> >> _______________________________________________
> >> Discuss mailing list
> >> Discuss at lists.onerng.info
> >> https://lists.ourshack.com/mailman/listinfo/discuss
> > _______________________________________________
> > Discuss mailing list
> > Discuss at lists.onerng.info
> > https://lists.ourshack.com/mailman/listinfo/discuss
>
> _______________________________________________
> Discuss mailing list
> Discuss at lists.onerng.info
> https://lists.ourshack.com/mailman/listinfo/discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/discuss/attachments/20241130/f092d32c/attachment.html>