[OneRNG-Discuss] Ask about the process to flash Firmware

[Paul Campbell]

I will have new boards early next year. The 3.0 design is identical to the
2.0 one both in software and board layout, the only differences were for
manufacturing. Mostly there's a rough patch under the USB connector to hide
the breakaway and the corners are milled very slightly round for aesthetic
reasons.

The 4.0 version will have a slightly different RNG circuit (again mostly
for manufacturability), it's currently undergoing long term reliability
testing, it should perform slightly better than the current one, I'm happy
to share it once I'm convinced it's a keeper

- Paul

On Sat, 30 Nov 2024, 03:18 , <reg-1 at email-1.level2.102604.icu> wrote:

> Dear OneRNG:
> I really love the random number generator, but since currently the v3
> version is Sold Out, I have to consider make my own pcbs. Which makes me
> need ask for the following questions:
>
> Currently the external is V3.0 design on the website, but the Github
> repo only have v2.0 design. If I can find v3.0 design anywhere?
>
> Also, since I am build it myself, I need manually flash the firmwares. I
> do have see the programmer pcb design. But I would like to ask could I
> use some other on-self programmer to do the job (like I already have
> j-link edu)? So I don;t need to build the programmer myself.
>
> 3rd: If I must build the programmer, do I need manually flash the
> Firmware for the programmer too? I have seen the programmer Firmware
> source code, but I am wondering is there any already build Benito7g.hex
> Firmware file I can just download and use (so I don't need to compile by
> myself, to be honest, I am not really sure how to do it.)
>
> And last but not least, for the 6-pin connection wire, which tag wire
> should I use? (I think it's TC2030-IDC-NL, but really not sure...)
>
> Best
>
> _______________________________________________
> Discuss mailing list
> Discuss at lists.onerng.info
> https://lists.ourshack.com/mailman/listinfo/discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/discuss/attachments/20241130/787a9d84/attachment.html>