[chbot] An unusual request!!

[GRAHAM CHRISTIE]

Hi Robin
 
I have the same problem and sort of fixed it.
Used duck tap on the inside of the tyre and put a tube in it.
In choosing the tube it is very important to get the valve coming out right, there is straight and bent valves options for the tubes, I chose the wrong one and if not for a cable tie it would disappear back into the rim.
 
Regards
Graham
 

> On 03/03/2023 18:17 NZDT Robin Gilks <gb7ipd at gmail.com> wrote:
>  
>  
> Does anyone have an old ride-on mower with reasonable front wheels? One of mine has lost its valve (it's tubeless) and knackered the tyre. It's a really useful mower for hacking out overgrown areas so I'd like to bodge it back together.
>  
> Tried sack barrow wheels but they fold up when you try to go round corners!!
>  
> It's a White (MTD) which is an American make hence the shaft diameter is 5/8 inch
>  
> B.T.W - tunnel house windows still working ;)
> --
> Robin Gilks
>  
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20230303/b76b1b23/attachment.html>