[chbot] Lazy and Blue tooth

[Mark Atherton]

The pinch-point for the project may be the phone/PC application. Phones 
tend to have BT built in, but how are you going to support BT on a PC 
(or do you mean a laptop ?).

Start off by writing a decent specification for the phone/PC end so you 
can clearly see what you are trying to achieve.

B4X may be useful start - multi-platform (phone, PC), free, and with 
support forums. There should be BT examples.

There is a low cost BT module called the HC05 - it might do what you 
want from the 328 end of things but may need another async port. Again, 
how is this going to connect ?

The ESP32 supports BT, so have you considered migrating from a 328 ?

Interested to know where you go with this project.

-mark




On 12/10/2023 12:04 PM, Marshland Engineering wrote:
> I have developed an EGT and CHT display for 2 strokes. Easy to see when riding
> the bike. Uses an ATMEG328
> Never having use Bluetooth before, I not sure where to start in getting the
> data to a phone or PC.
> 
> Basically All I want is to transmit 2 analog signals to a phone/PC.
> 
> Not sure whether to do it live or the ATMEG saves the info and connects and
> downloads later.
> 
> A pointer in the right direction would be great.
> 
> Thanks Wallace.
> 
> 
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.