[chbot] Molten Media Stripper Party - Thursday 6:30pm until late!
stephen at irons.nz
Wed Nov 25 21:14:48 GMT 2020
It was great fun. It was interesting to see how various PC cases work
-- how easy it is to access any part on some, but on others, everything
got in the way of something else.
We had to make-do with the tools we had last night. Next time, I would
take the following:
cordless drill/driverlong driver bits, 150 mm or longer
Philips #2 or Pozidrive #2 -- Pozidrive bits work in Philips screws,
but not the other way around)Torx T15
any other driver bits and hand screwdrivers that you have -- you never
know what you will needside-cutters for cable tieslong-nose plierssmall
prybar for levering -- I used a 6 mm flat screwdrivercut-resistant
gloves (Ninja, Esko, etc). Leather will work but might be a bit
thickother PPE. There did not seem to be much danger from falling
objects, noise, dust, flying chips, sparks; use your common sense.
I am busy tonight, but would otherwise be happy to help.
Hope your move to the new premises goes well.
On Thu, Nov 26, 2020 at 09:48, Andy Gardner <ceo at andygardner.com> wrote:
> Rudy and I would like to thank Russell, Stephen, Spencer and
> Brindsley to coming to the Stripper Party last night, between them
> they stripped over 70 system units, and made a huge dent on the scrap
> pile that we need to urgently process by the end of the week. Legends!
> We're having another party tonight at 6:30pm at 8b Wordsworth Street,
> so if anyone would like to come along and help that would be superb!
> It's a lot of fun - imagine pulling stuff apart and not getting in
> trouble with your dad for doing so!
> Hope to see you there,
> On 25/11/20 10:37 am, Andy Gardner wrote:
>> Sorry about neglecting to include the address. I knew, after getting
>> back from sorting and moving stuff from there in the small hours, I
>> would forget something in the invitation email.
>> The Stripper Party is at 8b Wordsworth Street - the old location.
>> We're having one tonight, and depending on how much stuff we manage
>> to get through, we might need to have another one on Thursday!
>> There's a lot more room to move there now that most of the "stock"
>> has be relocated.
>> The new location is 11/21 Michelle Road, Wigram, and will be run in
>> a more efficient and tidy manner.
>> There is going to be a special section - in the new much larger and
>> tidier shop - for stuff that robotics members (and men's shed
>> members) will be interested in.
>> We will probably be closed for a few days as we're just waiting for
>> Enable to get the fibre installed. I'm planning to pull some old
>> cat5 phone lines out of some ducting (and replace with a pullstring)
>> to speed up the install when the contractor arrives.
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> <mailto:Chchrobotics at lists.ourshack.com>
> Mail Archives: <http://lists.ourshack.com/pipermail/chchrobotics/>
> Meetings usually 3rd Monday each month. See http://kiwibots.org
> <http://kiwibots.org/> for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Chchrobotics