[chbot] recommendations for inexpensive 2 axis "cnc"

[Mark Atherton]

how many movable objects would you like on the map at the same time ?

can you confirm that the map will be horizontal, not wall mounted

-mark


> On 16 June 2020 at 10:40 andrew dean <nzandydean at gmail.com> wrote:
> 
>     I was toying with a puzzle in an upcoming "war bunker" room where i wanted to have some pieces on a "war map" move on their own.  I was thinking of placing below the table an electromagnet on a pair of  motors driving the X/Y axis that would allow me to "grab" an object from a location" and "drag" it mysteriously and magically to another location.
> 
>     Does anybody have any personal recommendations for a motor/frame/controller setup with a documented arduino library of some kind (that also is fairly budget cause i'm cheap) that would allow range of motion roughly 500-600mm square?  accuracy isn't super critical.
> 
>     cheers!
>     -andrew
> 
> 
> 
>     _______________________________________________
>     Chchrobotics mailing list Chchrobotics at lists.ourshack.com
>     https://lists.ourshack.com/mailman/listinfo/chchrobotics
>     Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
>     Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
>     When replying, please edit your Subject line to reflect new subjects.
> 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20200616/e93ae977/attachment.html>