[chbot] reel to reel tape recorder

Henri Shustak henri.shustak at gmail.com
Mon Aug 24 08:53:39 BST 2020


Digg’n 4 track Teac.

> On 20/08/2020, at 8:27 AM, Ivo Gorny <Ivo.Gorny at callaghaninnovation.govt.nz> wrote:
> 
> I have some - though not currently used.
> 
> Was a big fan back in the day...
> 
> What are you after?
> 
> 
> 
> Cheers
> 
> Ivo 
> 
> 
> On Thu, 20 Aug 2020 at 07:49, Chris Sharkman <chris.sharkman at gmail.com> wrote:
> 
> Hi All. have been looking at jump down the rabbit hole ( and money sink) of reel to reel tape.
> what advice can you give and if anyone has one would love to see it in operation.
> 
> cheers chris
> On Wed, Aug 19, 2020 at 11:00 PM <chchrobotics-request at lists.ourshack.com> wrote:
> Send Chchrobotics mailing list submissions to
>         chchrobotics at lists.ourshack.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://lists.ourshack.com/mailman/listinfo/chchrobotics
> or, via email, send a message with subject or body 'help' to
>         chchrobotics-request at lists.ourshack.com
> 
> You can reach the person managing the list at
>         chchrobotics-owner at lists.ourshack.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Chchrobotics digest..."
> 
> 
> Today's Topics:
> 
>    1. Ethernet to Wireless bridge client, Low power consumption,
>       low cost. (Mark Atherton)
>    2. Re: Ethernet to Wireless bridge client, Low power
>       consumption, low cost. (Spencer Travers)
>    3. Re: Ethernet to Wireless bridge client, Low power
>       consumption, low cost. (Mark Atherton)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Wed, 19 Aug 2020 09:28:08 +1200
> From: Mark Atherton <markaren1 at xtra.co.nz>
> To: Christchurch Robotics <chchrobotics at lists.linuxnut.co.nz>
> Subject: [chbot] Ethernet to Wireless bridge client, Low power
>         consumption, low cost.
> Message-ID: <2638201f-7350-7c75-f3a8-9c5fe298bd06 at xtra.co.nz>
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
> I need a small product (less than 50mm cube, or similar volume) with 
> 2.4GHz RP-SMA antenna one end, RJ45 the other, a USB socket to power the 
> unit off of 5V, and costs less than NZ$30 (new or used).
> 
> Not fussed about speed, this will be part of a telnet interface. Needs 
> to be able to be configured as a wireless-bridge.
> 
> Preferably readily available in NZ, and a commercial product (not a PCB 
> assembly).
> 
> Happy to re-flash a commercial product with open-source firmware as 
> required. Have previously used a Dlink DIR-300 loaded with Gargoyle, but 
> would really prefer to move to a lower-power, smaller solution.
> 
> Thoughts appreciated.
> 
> -Mark
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Wed, 19 Aug 2020 09:41:04 +1200
> From: Spencer Travers <spencer.travers at gmail.com>
> To: Christchurch Robotics <chchrobotics at lists.ourshack.com>
> Subject: Re: [chbot] Ethernet to Wireless bridge client, Low power
>         consumption, low cost.
> Message-ID:
>         <CAM1-1d2DNku9n+_tFdzGNOeq6QLod1jy2NiQYL7kxngWk4rk2w at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> You could look at the TP-Link TL-MR3020. $49 at PB Tech. With 8 MB flash
> and 64 MB RAM it will run the latest OpenWrt Linux distribution.
> No external SMA connector but maybe one could be added?
> 
> Dimensions are 74 x 67 x22 mm.
> 
> Spencer
> 
> On Wed, Aug 19, 2020 at 9:28 AM Mark Atherton <markaren1 at xtra.co.nz> wrote:
> 
> > I need a small product (less than 50mm cube, or similar volume) with
> > 2.4GHz RP-SMA antenna one end, RJ45 the other, a USB socket to power the
> > unit off of 5V, and costs less than NZ$30 (new or used).
> >
> > Not fussed about speed, this will be part of a telnet interface. Needs
> > to be able to be configured as a wireless-bridge.
> >
> > Preferably readily available in NZ, and a commercial product (not a PCB
> > assembly).
> >
> > Happy to re-flash a commercial product with open-source firmware as
> > required. Have previously used a Dlink DIR-300 loaded with Gargoyle, but
> > would really prefer to move to a lower-power, smaller solution.
> >
> > Thoughts appreciated.
> >
> > -Mark
> >
> > _______________________________________________
> > Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> > https://lists.ourshack.com/mailman/listinfo/chchrobotics
> > Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> > Meetings usually 3rd Monday each month. See http://kiwibots.org for
> > venue, directions and dates.
> > When replying, please edit your Subject line to reflect new subjects.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20200819/10d3729f/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 3
> Date: Wed, 19 Aug 2020 09:57:55 +1200
> From: Mark Atherton <markaren1 at xtra.co.nz>
> To: chchrobotics at lists.ourshack.com
> Subject: Re: [chbot] Ethernet to Wireless bridge client, Low power
>         consumption, low cost.
> Message-ID: <de2e687c-4b1d-9751-2561-9c08c8722c6c at xtra.co.nz>
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
> Thanks Spencer.
> 
> Quite close, and has other uses.
> 
> Shame manufacturers don't have parametric search on product power 
> voltage, and enclosure volume :)
> 
> Home you are well,
> 
> Mark
> 
> On 19/08/2020 9:41 AM, Spencer Travers wrote:
> > You could look at the TP-Link TL-MR3020. $49 at PB Tech. With 8 MB flash 
> > and 64 MB RAM it will run the latest OpenWrt Linux distribution.
> > No external SMA connector but maybe one could be added?
> > 
> > Dimensions are 74 x 67 x22 mm.
> > 
> > Spencer
> > 
> > On Wed, Aug 19, 2020 at 9:28 AM Mark Atherton <markaren1 at xtra.co.nz 
> > <mailto:markaren1 at xtra.co.nz>> wrote:
> > 
> >     I need a small product (less than 50mm cube, or similar volume) with
> >     2.4GHz RP-SMA antenna one end, RJ45 the other, a USB socket to power
> >     the
> >     unit off of 5V, and costs less than NZ$30 (new or used).
> > 
> >     Not fussed about speed, this will be part of a telnet interface. Needs
> >     to be able to be configured as a wireless-bridge.
> > 
> >     Preferably readily available in NZ, and a commercial product (not a PCB
> >     assembly).
> > 
> >     Happy to re-flash a commercial product with open-source firmware as
> >     required. Have previously used a Dlink DIR-300 loaded with Gargoyle,
> >     but
> >     would really prefer to move to a lower-power, smaller solution.
> > 
> >     Thoughts appreciated.
> > 
> >     -Mark
> > 
> >     _______________________________________________
> >     Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> >     <mailto:Chchrobotics at lists.ourshack.com>
> >     https://lists.ourshack.com/mailman/listinfo/chchrobotics
> >     Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> >     Meetings usually 3rd Monday each month. See http://kiwibots.org for
> >     venue, directions and dates.
> >     When replying, please edit your Subject line to reflect new subjects.
> > 
> > 
> > _______________________________________________
> > Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> > https://lists.ourshack.com/mailman/listinfo/chchrobotics
> > Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> > Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> > When replying, please edit your Subject line to reflect new subjects.
> > 
> 
> 
> 
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> _______________________________________________
> Chchrobotics mailing list
> Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> Please edit your Subject line to reflect new subjects. 
> 
> ------------------------------
> 
> End of Chchrobotics Digest, Vol 155, Issue 18
> *********************************************
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
> 
> 
> This electronic transmission and any documents accompanying this electronic transmission contain confidential information belonging to the sender. This information may be legally privileged. The information is intended only for the use of the individual or entity named above. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on or regarding the contents of this electronically transmitted information is strictly prohibited.
> 
> To ensure compliance with legal requirements and to maintain cyber security standards, our IT systems are subject to ongoing monitoring, activity logging and auditing. This monitoring and auditing service may be provided by third parties. Such third parties can access information transmitted to, processed by and stored on our IT systems._______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.




More information about the Chchrobotics mailing list