[chbot] ESCs for RC models
Andrew Errington
erringtona at gmail.com
Fri Feb 23 01:49:26 GMT 2018
Hi Synco,
Thanks for replying. I'm sorry, I should have mentioned the motor type.
Simple brushed dc motors.
I could build something, but I'm looking for an off-the-shelf module.
Popular and cheap fits the bill.
Thanks,
Andrew
On Feb 23, 2018 2:14 PM, "Synco Reynders" <synco.reynders at gmail.com> wrote:
> Hi Andrew,
>
> What type of motor are you going to be using?? If you are considering
> brushless, then because it's a traction application you'll most likely need
> a motor with position feedback (hall-effect sensors).
> If it's a brushed motor, things get a lot simpler since the controller
> only needs to use PWM to control the current.
>
> Synco
>
> On 23 February 2018 at 08:53, Andrew Errington <erringtona at gmail.com>
> wrote:
>
>> Hi all,
>>
>> Apropos of nothing in particular, I am looking for advice on what ESC to
>> buy to run a couple of motors on a skid-steer robot platform.
>>
>> I know there are several to choose from, and ones for boats are different
>> to ones for cars. I will need two of them.
>>
>> If anyone is into this and can recommend a specific module I'd be happy
>> to hear about it.
>>
>> Specifications:
>> Handle up to 24V at around 10A.
>> Variable speed forward and reverse across the typical servo timing pulse
>> range, with a stop band in the middle.
>> Probably non-braking.
>> Not expensive (between NZ$10 and NZ$20 each).
>> Available in Christchurch or NZ from a store or TradeMe.
>> BEC output not necessary.
>>
>> Any tips or pointers welcome.
>>
>> Thanks,
>>
>> Andrew
>>
>>
>> _______________________________________________
>> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
>> https://lists.ourshack.com/mailman/listinfo/chchrobotics
>> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
>> Meetings usually 3rd Monday each month. See http://kiwibots.org for
>> venue, directions and dates.
>> When replying, please edit your Subject line to reflect new subjects.
>>
>
>
>
> --
> Synco Reynders
> m: +64 21 1825332 <+64%2021%20182%205332>
> e: synco.reynders at gmail.com
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20180223/74c72e22/attachment-0001.html>
More information about the Chchrobotics
mailing list