[chbot] stm32f103 blue pill power advise?

Henri Shustak henri.shustak at gmail.com
Mon Dec 24 00:48:59 GMT 2018


Yes, modifying the extension cable is a great idea.. Then you can use it with pretty much any device down the road as well :)

> On 24/12/2018, at 1:32 PM, Mark Atherton <markaren1 at xtra.co.nz> wrote:
> 
> I like this.
> 
> Might go with a short USB A to Micro USB cable then make the diode power junction inside a USB A type M-F extender cable.
> 
> CPU consumes about 50mA at 3.3V, so 500mA diodes, and can be made for next to nothing.
> 
> So almost zero cost, very little heat, no modifications to the CPU board.
> 
> Well done Volker.
> 
> -Mark
> 
> On 24/12/2018 12:28 PM, Volker Kuhlmann wrote:
>> On Mon 24 Dec 2018 11:14:29 NZDT +1300, Mark Atherton wrote:
>> 
>>> All good, but the original posting asked for no modifications be done
>>> to the PCB.
>>> 
>>> Can't see how this might be done if you mess with USB anything...
>> Make an inline USB adapter, microUSB male/female, containing a schottky
>> diode. Feed 5V externally as it is. Hang everyone connecting USB
>> directly...
>> 
>> Are there short micro USB extension cables? Slice into that, cut the 5V
>> cable and insert a schottky. Rigid adapters plugged into devices are a
>> dicey mechanical proposition.
>> 
>> As Andrew astutely observed, all goes on 3.3V so schottky drops
>> shouldn't be relevant.
>> 
>> Volker
>> 
> 
> 
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.




More information about the Chchrobotics mailing list