[chbot] STL file vs 3D printer frustration..

[Chris Hellyar]

Hi Marek..

The Davinci does not use standard G-Code, so I can't use open standard 
slicers without flashing the printer.

The XYZ printers are the apple of the 3D printing world, out of the box 
functionality in a walled garden.

(Although I see simplify3d does support it, so might try the demo out.)

Cheers, Chris H.


On 07/09/17 10:12, Marek Kuziel wrote:
> Have you tried MatterControl and its native slicer? 
> http://www.mattercontrol.com/
>
> Marek
>
> On Wed, Sep 6, 2017 at 9:18 PM, Chris Hellyar <chris at trash.co.nz 
> <mailto:chris at trash.co.nz>> wrote:
>
>     Hi-ho folks...
>
>     I'm having a bit of frustration with the slicer for my 3D printer...
>
>     Using a Davinci 1.0 with their standard software and 50% of the time
>     .stl files out of openscad cause the program to crash outright, but
>     another file will work fine.
>     _______________________________________________
>     Chchrobotics mailing list Chchrobotics at lists.ourshack.com
>     <mailto:Chchrobotics at lists.ourshack.com>
>     https://lists.ourshack.com/mailman/listinfo/chchrobotics
>     <https://lists.ourshack.com/mailman/listinfo/chchrobotics>
>     Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
>     <http://lists.ourshack.com/pipermail/chchrobotics/>
>     Meetings usually 3rd Monday each month. See http://kiwibots.org
>     for venue, directions and dates.
>     When replying, please edit your Subject line to reflect new subjects.
>
>
>
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20170907/766b5e0c/attachment.html>