[chbot] STL file vs 3D printer frustration..

Marek Kuziel marek at kuziel.info
Wed Sep 6 23:12:47 BST 2017


Have you tried MatterControl and its native slicer?
http://www.mattercontrol.com/

Marek

On Wed, Sep 6, 2017 at 9:18 PM, Chris Hellyar <chris at trash.co.nz> wrote:

> Hi-ho folks...
>
> I'm having a bit of frustration with the slicer for my 3D printer...
>
> Using a Davinci 1.0 with their standard software and 50% of the time
> .stl files out of openscad cause the program to crash outright, but
> another file will work fine.
>
> I'm assuming there is something wrong with my model, but it's a really
> simple parametric enclosure base / box...
>
> Can someone using a difference slicer (or maybe the xyzprinting one?)
> have a go at opening this stl file and see if you can see what the issue
> is?  (74k stl.. Just a widdle one)
>
> https://www.dropbox.com/s/u4oib2qpcsjkzkq/boxbig.stl?dl=0
>
> I asked on one of the 3D forums and all I got was a bunch of various
> fanboys telling me to replace my slicer and hack/flash my 3D printer
> which I really can't be bothered with as openscad files are the only
> problems I've had with it and the print quality is fine for what I want
> although I know their slicer is a bit poos.
>
> Cheers, Chris H.
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20170907/6e30f589/attachment-0002.html>


More information about the Chchrobotics mailing list