[chbot] SRAM with auto addressing

[Charles Manning]

Some years back (1989 or so) I used stuff called FIFO RAM: basically a
parallel in parallel out FIFO. I see it is still around, though obscenely
expensive.

I used it in a parallel port INPUT board I designed for a PC that accepted
the data into the FIFO then DMAd it into memory where we could process it
further (we were emulating a plotter attached via parallel port). Worked
great.


On Tue, Nov 14, 2017 at 2:42 PM, Robin Gilks <robin at gilks.org> wrote:

>
> > FRAM? Never used it, but it might do what you want.
> >
> > Here's a simple example from some guy on the internet whom I have never
> > met:
> > http://www.kerrywong.com/2012/01/15/using-fram-as-
> nonvolatile-memory-with-arduino/
>
> Didn't realise that FRAM was still available - first used it on an AVR
> some 15 years ago.
>
> http://gilks.ath.cx/tvipug/tnc/tncindex.html
>
> --
> Robin Gilks
>
>
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20171114/a1f930dd/attachment-0003.html>