[chbot] Bevel gears (Charles Manning)

[Mark Atherton]

Hi Wallace,

I trust that you will be using the FSAR001 with an isolation 
transformer, this part can have the 0V output directly attached to live mains !

Regards,

Mark


At 10:12 a.m. 14/03/2012, you wrote:
>I found on at car shop. I need to be able to adjust a screw 
>incrementally both CW and CCW in a smooth action. The one I have is 
>a screwdriver with a bevel gear at the end.
>
>SDI-SI would have been my next best step.
>
>A bit of info, this chip produces 5 volts from the mains supply. 
>About $2 each so you can run your micro from mains without a transformer.
>Fairchild's - FSAR001 - Not for boys without big boy trousers on.
>
>Thanks Wallace
>
>
>_______________________________________________
>Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
>http://lists.ourshack.com/mailman/listinfo/chchrobotics
>Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
>Web site: http://kiwibots.org
>Meetings 3rd Monday each month at Tait Radio Communications, 175 
>Roydvale Ave, 6.30pm
>
>When replying, please edit your Subject line to reflect new content.