[chbot] OT: SquashFs 1.0

[Synco Reynders]

No luck there. I get:
Can't find a SQUASHFS superblock on ../../../../dsl.bin
/s

On 30 September 2011 15:07, Simon Chester <simonches at gmail.com> wrote:
> Not sure how useful it is, but this apparently supports squashfs 1.0
> LZMA: http://bitsum.com/firmware_mod_kit.htm
> Simon
>
> On Fri, Sep 30, 2011 at 1:23 AM, Synco Reynders <synco.reynders at gmail.com>
> wrote:
>>
>> Hi all,
>>  I'm wanting to fix a few annoying 'features' / security holes in my
>> DSL-G604T ADSL router and am struggling to unsquash the following
>> firmware image file:
>>
>> ftp://files.dlink.com.au/products/DSL-G604T/REV_B/Firmware//Firmware_v2.00B07.AU_BIN/DSL-G604T_2.00B07.AU_20060901.bin
>>
>> I found the magic number ('hsqs') at offset 0x81000, so used the
>> following to trim it back:
>> dd if=imagefile.bin skip=1032 of=sqsh.bin
>>
>> Now I'm stuck since the major/minor version is 1.0 and unsupported by
>> my kernel and it uses LZMA compression. I've tried to compiling
>> 'unsquash' with LZMA support but it doesn't work for version 1.0. And
>> before 'unsquash' existed you needed a kernel module so that the image
>> can be mounted, although I've got a bit bogged down trying to
>> make/patch this kernel module. Any other tips? Suggestions?
>>
>> Thanks in advance,
>> /s
>>
>> _______________________________________________
>> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
>> http://lists.ourshack.com/mailman/listinfo/chchrobotics
>> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
>> Web site: http://kiwibots.org
>> Meetings 3rd Monday each month at Tait Radio Communications, 175 Roydvale
>> Ave, 6.30pm
>>
>> When replying, please edit your Subject line to reflect new content.
>
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meetings 3rd Monday each month at Tait Radio Communications, 175 Roydvale
> Ave, 6.30pm
>
> When replying, please edit your Subject line to reflect new content.
>