[chbot] 19" rack rails...

[Kay edgecumbe]

little metals  off moorhouse rd in stewart st will supply as much or as small a piece of rail. angle. rod. alloy and if they dont have it they will purchase a full length the same day and supply you with what you want
they are very good for those difficult to find materials  and blacks fasteners (gasson st )are the place for small  unusual nuts bolts etc 

> Date: Fri, 15 Jul 2011 03:26:29 +1200
> From: m.beckett at amuri.net
> To: chchrobotics at lists.linuxnut.co.nz
> Subject: Re: [chbot] 19" rack rails...
> 
> Chris
> I'll have a look at home, I have some.
> 
> I have in the past just used angle alloy, and drilled and tapped the holes
> to M5.
> Worked a treat.
> 
> 
> Mark
> 
> > A bit of a random question, but figured this was the best place to ask. :)
> >
> > I'm on the hunt for some standard 19" rack mounting rails....  The bits
> > that go either side of the rack to clip the blind nuts into.
> >
> > I want to make a customer rack/stand for some 19" gear by mounting the
> > rails to some MDF.
> >
> > So...
> >
> > Anyone know where you can buy the stuff, or alternately, anyone got some
> > old rack components lying around I can magpie? :-)
> >
> > FYI: I need 10U high/long bits..
> >
> > Cheers, Chris H
> >
> > _______________________________________________
> > Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> > http://lists.ourshack.com/mailman/listinfo/chchrobotics
> > Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> > Web site: http://kiwibots.org
> > Meeting Time and Location uncertain while Science Alive is out of action.
> >
> > When replying, please edit your Subject line to reflect new content.
> >
> 
> 
> 
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meeting Time and Location uncertain while Science Alive is out of action.
> 
> When replying, please edit your Subject line to reflect new content.
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/chchrobotics/attachments/20110715/1acf5948/attachment.htm