[chbot] 19" rack rails...

[m.beckett at amuri.net]

Chris
I'll have a look at home, I have some.

I have in the past just used angle alloy, and drilled and tapped the holes
to M5.
Worked a treat.


Mark

> A bit of a random question, but figured this was the best place to ask. :)
>
> I'm on the hunt for some standard 19" rack mounting rails....  The bits
> that go either side of the rack to clip the blind nuts into.
>
> I want to make a customer rack/stand for some 19" gear by mounting the
> rails to some MDF.
>
> So...
>
> Anyone know where you can buy the stuff, or alternately, anyone got some
> old rack components lying around I can magpie? :-)
>
> FYI: I need 10U high/long bits..
>
> Cheers, Chris H
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meeting Time and Location uncertain while Science Alive is out of action.
>
> When replying, please edit your Subject line to reflect new content.
>