[chbot] PCB fab house for 4 layer boards

[Michael Pearce]

Bad formatting in last email.... had hyperlink to wrong address try this one

http://www.goldphoenixpcb.biz

On Tue, Aug 9, 2011 at 6:59 AM, Michael Pearce <mike at kiwacan.co.nz> wrote:

> I usually use http://www.goldphoenixpcb.biz
> US$100 to US$140 for a mixed panel up to 10" x 15"  ds pth sm cr
> US$20 extra for shipping to NZ... usually had a 5 to 7 day turn to the US
> including shipping
>
> They have a fixed pricing structure (for ds pth at least) so you can easily
> work out your board costs.
>
> Never had any issues with them.
>
> Mike
>
>
> >
> > On Aug 9, 2011 4:29 AM, "Chris Hellyar" <chris at trash.co.nz> wrote:
> >
> > As in 4 layers of copper...
>
> >
> >
> > On 09/08/11 20:32, Mark Atherton wrote:
> > > any recommendations ?
> > >
> > I need 4 pcs, 100 x 140mm with ...
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/chchrobotics/attachments/20110809/e21b8724/attachment.htm