[chbot] Greetings

Stuart Whelan stuart at somepointinthefuture.co.nz
Tue Jan 15 08:04:04 GMT 2008


Hi Chris,

Thanks for the info!

Yes, I would be keen to split some shipping and go in for a large order.

Let me know when you are ready to go..

Kind Regards,
Stuart.

> -----Original Message-----
> From: chchrobotics-bounces at lists.linuxnut.co.nz 
> [mailto:chchrobotics-bounces at lists.linuxnut.co.nz] On Behalf 
> Of Carl Ranson
> Sent: Tuesday, 15 January 2008 20:20
> To: Christchurch Robotics
> Subject: Re: [chbot] Greetings
> 
> 
> They were these things:
> http://www.parallax.com/Store/Microcontrollers/PropellerDevelo
> pmentBoards/tabid/514/CategoryID/73/List/0/Level/a/ProductID/4
> 23/Default.aspx?SortField=ProductName%2CProductName
> 
> Along with one of these for programming it.
> http://www.parallax.com/Store/Microcontrollers/PropellerTools/
> tabid/143/CategoryID/73/List/0/Level/a/ProductID/398/Default.a
> spx?SortField=ProductName%2cProductName
> 
> And the schematic as I posted before is
> http://www.rayslogic.com/propeller/ProtoSched.gif
> 
> Hanno sent me to a NZ supplier he'd used but they want about 
> NZ 35 for just the chip and havent gotten back to me about 
> the board's themselves. 
> The parallax price is USD20 for the board with chip on it.
> 
> The shipping from the parrallax site isn't cheap, but if the 
> order is big enough it will get be ok (around US$40 per 
> order) So I've got in mind to put a big order through if 
> anyone wants to get in on it. I'll probably buy 4 of the 
> boards and some of the sensors Let me know.
> CR
> 
> Stuart Whelan wrote:
> 
> > Hi Folks,
> >
> > I came along to the group in December, thoroughly enjoyed myself, 
> > thank you!
> >
> > So this post is a introduction and a request for info.
> >
> > I work at Tait Electronics, having just joined. In my 
> previous job I 
> > worked on the flight simulators for Pacific Simulators, 
> mostly writing 
> > hardware interfacing software.
> >
> > I was very impressed by the propeller demo, and was 
> wondering exactly 
> > what in needed to start mucking around with them?
> >
> > What was in the kits that were won on the robotics group night?
> >
> > Kind Regards,
> > Stuart Whelan.
> >
> >-------------------------------------------------------------
> ----------
> >-
> >
> >_______________________________________________
> >Chchrobotics mailing list
> >Chchrobotics at lists.linuxnut.co.nz
> >http://lists.ourshack.com/mailman/listinfo/chchrobotics
> >  
> >
> 
> 
> _______________________________________________
> Chchrobotics mailing list
> Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics




More information about the Chchrobotics mailing list