[chbot] surface mount fuses

[Richard Jones]

Carl,

I have some FRC01 1206 fusible resistors 1R5 rated for .125W in use.
The curves show them blow at 3W between 10^-2 and 10^2 or so seconds.
See http://www.farnell.com/datasheets/955.pdf
Give me a ring on 03 357 0712 or if you are still working near Sheffield
Crescent I'll be walking past about 12.30 today.

Richard


On Thu, 7 Feb 2008 19:01:21 +0900 (JST), "Andrew Errington"
<a.errington at lancaster.ac.uk> wrote:
> If you can't get one could you replace it with a short and install a
> full-size fuse further up the line?  Maybe a 20mm glass one.
> 
> Alternatively, replace the fuse with a PolySwitch (IIRC), it is a
> self-resetting fuse.  When it blows you remove the fault and the fuse
will
> reset when it cools down.
> 
> A
> 
> On Thu, February 7, 2008 17:40, Carl Ranson wrote:
>> bah,
>>
>> I've just blown the fuse in my USB oscilloscope
>>
>>
>> Any of you guys have a supply of 1206 sized surface mount 500mA fuses?
>> I need 1 but if you know where I can buy some, i'll grab a bunch.
>>
>>
>> Cheers,
>> CR
>>
>>
>> _______________________________________________
>> Chchrobotics mailing list
>> Chchrobotics at lists.linuxnut.co.nz
>> http://lists.ourshack.com/mailman/listinfo/chchrobotics
>>
>>
> 
> 
> 
> _______________________________________________
> Chchrobotics mailing list
> Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics