[chbot] surface mount fuses

[Andrew Errington]

If you can't get one could you replace it with a short and install a
full-size fuse further up the line?  Maybe a 20mm glass one.

Alternatively, replace the fuse with a PolySwitch (IIRC), it is a
self-resetting fuse.  When it blows you remove the fault and the fuse will
reset when it cools down.

A

On Thu, February 7, 2008 17:40, Carl Ranson wrote:
> bah,
>
> I've just blown the fuse in my USB oscilloscope
>
>
> Any of you guys have a supply of 1206 sized surface mount 500mA fuses?
> I need 1 but if you know where I can buy some, i'll grab a bunch.
>
>
> Cheers,
> CR
>
>
> _______________________________________________
> Chchrobotics mailing list
> Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
>
>