[mythtvnz] New install Xubuntu 20.04

[Paul]

Hi All

This is  mainly for Stephen.

I am continuing to fine tune my new install and have identified a 
problem with Stephen's Systemctl helper scripts in Xubuntu 20.04.

With the server halt command in BE shutdown/wake up options set as : 
"sudo /usr/local/bin/mythtv-systemctl-helper.sh poweroff" the BE 
attempts to shutdown after being idle for 300 seconds as per the 
settings dictate . The shutdown gets as far as the Xubuntu splash with 
the rotating indicator then locks up - the rotating indicator freezes.

The only way to escape this is to do a hard reset on the system - magic 
SysRq does not work.

I have tried all the mythtv-systemctl-helper.sh options from the 
terminal and they all work fine.

Reverting the server halt command in BE back to sudo sh -c "mythshutdown 
-- shutdown"   makes everything work normal.

The back end start and stop commands in  Backend Control settings, that 
use mythtv-systemctl-helper.sh poweroff don't seem to be a problem (so far)

I'm using ACPI wake up on this system but this shutdown lock up problem 
showed up before I enabled Mythwelcome .

With Mythwelcome enabled and using the default server halt command , 
everything seems to work fine. Mythwelcome shuts the system down if 
there are no recordings in the near future and starts the system in time 
to record programmes.

The setup I'm using comes from this tutorial: 
http://gedakc.users.sourceforge.net/display-doc.php?name=pvr-mythtv-auto-wakeup 
<http://gedakc.users.sourceforge.net/display-doc.php?name=pvr-mythtv-auto-wakeup>

My current system is Mythbuntu 16.04 and does not use the helper scripts 
and does not seem to have any problems.


-Paul


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/mythtvnz/attachments/20210710/e1dd2e9d/attachment.html>