[mythtvnz] EPG stops on Friday

[Curtis Walker]

On 3 November 2017 at 20:08, Robert Fisher <robert at fisher.net.nz> wrote:
>
> Yes it does.
>
> Robert Fisher
>
> On 3/11/2017 7:37 PM, "Curtis Walker" <sultanoswing at gmail.com> wrote:
>>
>> On 3 Nov 2017 7:31 pm, "Robert Fisher" <robert at fisher.net.nz> wrote:
>>
>> These are the notes that I used when I first setup my system:-
>>
>> 1) Download tv_grab_nz-py from http://nice.net.nz/tv_grab_nz-py/
>>
>> 2) Copy tv_grab_nz-py to /usr/local/bin.  Make sure that it is executable. (sudo chmod +x tv_grab_nz-py)
>>
>> 3) Configure it. Note that the configuration file name must match that
>> name of the video source configured in mythtv-setup for the
>> mythbackend/mythfilldatabase to use this grabber.
>> tv_grab_nz-py --configure --config-file ~/.mythtv/<video sources name>.xmltv
>> Step 3 had some problems for me but it was overcome by copying and editing another <video sources name>.xmltv
>>
>> You also need to symlink otherwise mythfilldatabase will not work automatically (it uses the user mythtv)
>> sudo ln -s /home/yourusername/.mythtv/Freeview.xmltv /home/mythtv/.mythtv/Freeview.xmltv
>>
>> 4) To see if the xmltv side of things works run
>> tv_find_grabbers
>>
>> This should return a list of all the installed grabbers, which should
>> include tv_grab_nz-py.
>>
>> 5) To see if the myth side of things works run
>> mythfilldatabase
>> Pay close attention to the output of this. If it looks like it worked,
>> the MythWeb status page should also show a successful run.
>>
>> 6) On the master backend run mythsetup and
>> a) In Video Sources set "New Zealand (py)" as the grabber for your
>> Video Source.
>> b) In General, on the Mythfilldatabase page (its the last page) enable
>> "Automatically run mythfilldatabase". Configure time, frequency, etc
>> to suite. Now Myth should use tv_grab_nz-py to update EPG
>> periodically. The MythWeb status page shows when it was last run and
>> what the results were.
>>
>> Robert Fisher
>>
>> On 1/11/2017 11:54 AM, "me" <08004us at gmail.com> wrote:
>>>
>>> Hi all
>>>
>>> Could someone contact me off-list wrt activating the EPG grabber py.
>>>
>>> I'm Linux literate, and have re-vamped most of the menus for our own needs, but...
>>>
>>> I need a shove in the right direction to implement the automated script to harvest the fruits of the EPG fairy!
>>>
>>> After many years of MythTV being in our home, we're getting a bit over missing programs because they are "all new" etc.
>>>
>>> Many thanks
>>>
>>> Noel.
>>>
>>> _______________________________________________
>>> mythtvnz mailing list
>>> mythtvnz at lists.ourshack.com
>>> https://lists.ourshack.com/mailman/listinfo/mythtvnz
>>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>
>>
>> _______________________________________________
>> mythtvnz mailing list
>> mythtvnz at lists.ourshack.com
>> https://lists.ourshack.com/mailman/listinfo/mythtvnz
>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>
>>
>> Great guide, thanks Robert.
>>
>> Quick question (since I can't remember from when I did use this grabber and source), does this pull in EPG data for Al Jazeera? For some reason that's the only channel that isn't getting over the air EIT for me, and I may use tv_grab_nz-py for this channel alone.
>>
>>
>>
>> _______________________________________________
>> mythtvnz mailing list
>> mythtvnz at lists.ourshack.com
>> https://lists.ourshack.com/mailman/listinfo/mythtvnz
>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>

Thanks again...on review it turns out I hadn't checked the
EIT-over-air box for Al Jazeera in the channel editor.