[mythtvnz] epg help new box
stugo
stugo at xtra.co.nz
Fri Feb 6 20:21:52 GMT 2015
On 6/02/2015 10:20 p.m., Stephen Worthington wrote:
> On Fri, 06 Feb 2015 20:20:50 +1300, you wrote:
>
>> Hi Guys
>> I need some help please, my linux knowledge and all my myth knowledge is
>> google based and lurking on this forum for years.
>> I have a dual core 2.6 running box 4 gig of ram
>> nova 550t tuner and gt 220 vid card
>> new drive are 120g solid state and I have a 2 t wd black.
>> I have not configured the wd on to the system yet and that will be
>> another challenge
>> I have been meaning to upgrade my box for a while. It was running
>> version 0.24
>> And now I need to as it has died
>> I had a partially installed version of Ubuntu 12 on the 120g
>> So I upgraded to 14.04
>> Did channel scan and have channels work and had a 2 hr epg as it was
>> looking at EIT data
>> Changed it from a localhost to its ip on the network and upgraded the
>> other front end.
>> And then copied the script I have attached below and I am stuck on why
>> this does not work,
>> Also now I am not getting any epg data now
>>
>>
>>
>>
>> #! /bin/bash
>> wget http://epg.org.nz/freeview.xml.gz
>> gunzip freeview.xml.gz
>> mythfilldatabase --file 1 freeview.xml --manual
>>
>> I realize the has to be changed to --update once I have run this once
>> and I may have to remove the freeview file
>>
>>
>> Terminal readout as follows
>> stugo at stugo-G33M-DS2R:~$ #! /bin/bash
>> stugo at stugo-G33M-DS2R:~$ wget http://epg.org.nz/freeview.xml.gz
>> --2015-02-06 18:29:10-- http://epg.org.nz/freeview.xml.gz
>> Resolving epg.org.nz <http://epg.org.nz> (epg.org.nz
>> <http://epg.org.nz>)... 120.138.17.20
>> Connecting to epg.org.nz <http://epg.org.nz> (epg.org.nz
>> <http://epg.org.nz>)|120.138.17.20|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: 198456 (194K) [application/octet-stream]
>> Saving to: ‘freeview.xml.gz’
>>
>> 100%[======================================>] 198,456 1.25MB/s in
>> 0.2s
>>
>> 2015-02-06 18:29:10 (1.25 MB/s) - ‘freeview.xml.gz’ saved [198456/198456]
>>
>> stugo at stugo-G33M-DS2R:~$ gunzip freeview.xml.gz
>> stugo at stugo-G33M-DS2R:~$ mythfilldatabase --file 1 freeview.xml --manual
>> Boolean type options do not accept values:
>> --file
>> Received '1' but unassociated arguments have not been enabled
>> mythfilldatabase version: fixes/0.27 [v0.27.4-30-g3b43903]
>> www.mythtv.org <http://www.mythtv.org>
>> Misc. Options:
>> --dd-file Bypass grabber, and read SD data from file
>> --lineupid DataDirect lineup of input xml file
>> --offset Day offset of input xml file
>> --xmlfile XML file to import manually
>> --dd-grab-all refresh full data using DataDirect
>> --file Bypass grabbers and define sourceid and file
>> --xmlfile XML file to import manually
>> --manual Run interactive configuration
>> --no-mark-repeats do not mark repeats
>> --preset Use channel preset values instead of numbers
>> -h OR --help OR --usage Display this help printout, or give detailed
>> information of selected option.
>> --version Display version information.
>> --sourceid Operate on single source
>>
>> Channel List Handling Options:
>> --do-channel-updates update channels using datadirect
>> --do-not-filter-new-channels don't filter ATSC channels for addition
>> --only-update-channels only update channel lineup
>> --remove-new-channels disable new channels on datadirect web
>> interface
>>
>> Filtering Options:
>> --dont-refresh-tba don't refresh "To be announced" programs
>> --max-days force number of days to update
>> --refresh Provide a day or range of days to
>> refresh. Can
>> be used repeatedly.
>>
>> Logging Options:
>> --enable-dblog Enable logging to database.
>> --loglevel Set the logging level. All log messages at
>> lower levels will be discarded.
>> In descending order: emerg, alert,
>> crit, err,
>> warning, notice, info, debug
>> defaults to info
>> --logpath Writes logging messages to a file in the
>> directory logpath with filenames in the
>> format:
>> applicationName.date.pid.log.
>> This is typically used in combination with
>> --daemon, and if used in combination with
>> --pidfile, this can be used with log
>> rotators,
>> using the HUP call to inform MythTV to
>> reload
>> the file
>> --nologserver Disable all logging but console.
>> -q OR --quiet Don't log to the console (-q). Don't log
>> anywhere (-q -q)
>> --syslog Set the syslog logging facility.
>> Set to "none" to disable, defaults to none.
>> -v OR --verbose Specify log filtering. Use '-v help' for
>> level
>> info.
>>
>> Guide Data Handling Options:
>> --only-update-guide Only update guide data
>>
>> Have i got the script wrong, as I can see I am getting the file and
>> unzipping it, but it is not allowing me to set it to myth database I
>> have set all the backend channel Id to the scanned channels
>>
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> http://www.avast.com
> You have the mythfilldatabase command options wrong. The builtin help
> does not make the correct syntax at all clear. I believe this is what
> you need now:
>
> mythfilldatabase --file --sourceid 1 --xmlfile freeview.xml --manual
>
> See:
>
> http://www.mythtv.org/wiki/Mythfilldatabase
H Steve
Thanks for that, I new it would be something simple, I had been
looking at the site you pointed me to, but did not know what to add.
I have another question on change the scrip to up date.
The original script is for first time install so to update the data in
the guide is this correct
mythfilldatabase --file --sourceid 1 --xmlfile freeview.xml --only-update-guide
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
More information about the mythtvnz
mailing list