[mythtvnz] HVR2200 dead?

[Nick Rout]

On Sun, Aug 23, 2015 at 7:20 PM, <dmoo1790 at ihug.co.nz> wrote:

>
>
> On 23/08/2015 18:24, Nick Rout wrote:
>
>> On Sun, Aug 23, 2015 at 5:53 PM, Curtis Walker  wrote:
>>
>> On 23 August 2015 at 17:45, David Moore wrote:
>>> >
>>> > Hi folks,
>>> >
>>> > Looks like my HVR2200 has died. I get "saa7164_downloadimage()
>>> image corrupt" in syslog:
>>> >
>>> > [   15.808152] saa7164 driver loaded
>>> > [   15.839286] saa7164 0000:05:00.0: PCI INT A -> Link[AE4A] ->
>>> GSI 16 (level, low) -> IRQ 16
>>> > [   15.839444] CORE saa7164[0]: subsystem: 0070:8980, board:
>>> Hauppauge WinTV-HVR2200 [card=4,autodetected]
>>> > [   15.839450] saa7164[0]/0: found at 0000:05:00.0, rev: 129,
>>> irq: 16, latency: 0, mmio: 0xfd400000
>>> > [   15.839455] saa7164 0000:05:00.0: setting latency timer to
>>> 64
>>> > [   15.839459] IRQ 16/saa7164[0]: IRQF_DISABLED is not
>>> guaranteed on shared IRQs
>>> > [   16.339169] saa7164_downloadfirmware() no first image
>>> > [   16.339223] saa7164_downloadfirmware() Waiting for firmware
>>> upload (v4l-saa7164-1.0.3.fw)
>>> > [   16.339230] saa7164 0000:05:00.0: firmware: requesting
>>> v4l-saa7164-1.0.3.fw
>>> > [   16.368133] saa7164_downloadfirmware() firmware read 3978608
>>> bytes.
>>> > [   16.368136] saa7164_downloadfirmware() firmware loaded.
>>> > [   16.368144] saa7164_downloadfirmware()
>>> SecBootLoader.FileSize = 3978608
>>> > [   16.368149] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
>>> > [   16.368150] saa7164_downloadfirmware() BSLSize = 0x0
>>> > [   16.368151] saa7164_downloadfirmware() Reserved = 0x0
>>> > [   16.368153] saa7164_downloadfirmware() Version = 0x51cc1
>>> > [   20.440022] saa7164_downloadimage() image corrupt
>>> >
>>> > There have been no kernel updates or firmware changes on my
>>> system for a while so I think its a hardware fault on the HVR2200.
>>> The card is about 5 years old. I have two questions:
>>> >
>>> > 1) Anything I can try to get the card going?
>>> > 2) Anyone know of an NZ (or other) source for an HVR2200?
>>> >
>>> > David
>>> >
>>>
>>
>> That links to one supplier and he lists it as "retired".
>>
>> I would buy a HD homerun, without question.
>>
>> Yeah, but then I'm stuck with using the interweb for the EPG whereas now
> I can pull it from the DVB broadcast.
>
>
I think you can with an HDHR too. Not sure though.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/mythtvnz/attachments/20150823/820c9fee/attachment.html>